I am looking for A C-10 preferably fleetside bed. Must be solid but I am not afraid of something that needs paint. Can be a roller, complete, will entertain all options. Please call.Andy Seuss (603) 944-3213
Andy, i have a 1967 c-10 chevy thats for sale and i just seen your entry. i will try to call you later this evening to see if your interested if not you may call me. its two tone paint orange with white top, long bed, 283 motor, only 88,000 original miles, interior almost new.you can reach me at (435)650-2913tyler turcasso
Hi Andy. 1969 Maroon Fleetside C20 for sale in Seattle. This was my dad's truck and is all original. Garage kept since the day he drove it out of the dealer showroom. Extremely well-kept. Just call Robert @ 206-724-3062.
1969 Maroon C20 Fleetside Long-Bed
Mine is for sale!!!Are you looking for a truck or just the bed?
68 chop top 327 5 speed Stereo and AC. A real hot rod has a clutch. Anyone can modify it BUT it takes a real man to chop one up. See my truck in Reader's Ride and vote on it!
Go to TNCHEV.com I have over 60 trucks from projects to drivers 1967-72, and any part you need. firstname.lastname@example.org
don't know if a 1980 will work for you....1980 Chevrolet Pickup FOR SALE....custom dark blue paint, great condition, no dings or dents, perfect chrome, and clean clean clean engine. $5,500.00Stock 350 with air, upgraded alloy wheels and wide tires, custom paint (dark blue), radio am/fm/cdJust had the bench seat re-covered, looks great! Started replacing the wood truck bed. Took out the old planks and began replacing but am 2 planks short.Contact Phil Mitchell at 520-623-2899
would u happen to have a dashboard for sale to fit a 1967 chevy p/u. If so please call me at 936-674-7065. Thank You, Ricky Medina
Andy, I have over 60, 1967-72 chevy and gmc pickups, blazers and burbs. From bare frames to low mile originals. Also, virtually any part you may want. TNCHEV.com email@example.com I am located in east Tn.
I also have a 1969 Chevy Fleet Side For Sale Iy has a straight six In It It does run but brakes are bad,truck Is fair but needs work also has some rust not real bad I also have some new parts for It. I also have disc brake set up for It to I'll take $1500.00 for It. Call any time 678-612-4398 Thanks ED
Andy, I have a 1970 chevy C-10 lng wheelbase stepside with a 250 6 cyl. engine. It was mt dad's truck and he gave it to me. It has only 122,00 miles on the engine. It was a three speed on the colum, but i put it on the floor. Everything thing is original. The body is in very good condition. I had it painted about 7 years ago. Possibly looking to sale if the price is right. For more information please reply. Regards, Ron
I don't think Super is coming back but Andy I know you can find someone on this forum to give the C-10 a new home.
hi this my first post Ihave a1969 c-10 it has drop spindles21/5inch onfront 4 imch drop springs rear 283 engine 3speed on column diskbrake conversion on front i have extra doors it needs some work i/m in cincinnati ohio my phone # 15136174888 if interested
Hi Andywe have a 1971 Chevrolet Cheyenne 20 for saleif this may be of interest you can email me:firstname.lastname@example.org
I WOULD LIKE TO TRADE THE TRUCK,BUT IM ALSO OPEN TO CASH OFFERS,PLEASE BE REAL,IM NOT GOING TO GIVE THE TRUCK AWAY,THERE HAS BEEN ALOT OF TIME AND MONEY SPENT ON BODY WORK AND MODS,THANKS FOR LOOKING..... I HAVE UP FOR SALE OR TRADE?? A 1971 CHEVY PROSTREET PICKUP ROLLING SHELL,I HAVE ALL THE ORIGNAL PARTS THAT CAME OFF THE TRUCK(WIREING HARNESS,GLASS,CLUSTER,ETC.) ALL Of THE BODY WORK WAS professionally DONE ,SMOOTHED DOOR HANDELS,TAIL GATE, GAS FILLER AND ALL OTHER TRIM,INSIDE THE BED WAS DONE WITH STEEL FLOOR AND WHEEL TUBS,NEW FLOORS,NEW INNER AND OUTER ROCKERS -ALL WERE VERY WELL DONE,CUSTOM ALLUIMIN FUEL TANK,AC/CAB,I STILL HAVE THE AC/DOG HOUSE AND HEATER BOX,THE FRONT CLIP IS NEW 1968 GM FRONT CLIP,NEW CORE SUPPORT AND GRILL,THE FRAME WAS STRIPPED AND PAINTED GLOSS BLACK,ALL NEW BUSHINGS,NARROWED 12 BOLT REAR,BRAND NEW REAR WELD ROD LITE 15X14 WHEELS, HOOISIER STREET RADIAL TIRES 31X21.50 TIRES,ALL THE HARD WORK WAS DONE!!!! IM LOOKING FOR SOMETHING OLDER 1926-1957 TRUCK,CARS OR OPEN TO STREET BIKE TRADES ALSO?????????????? PLEASE REMEMBER THIS IS A PROJECT TRUCK,IF YOU HAVE NEVER RESTORED A OLD CAR OR TRUCK,YOU MIGHT WANT TO PASS ON THIS,I DONT WANT TO WASTE YOUR TIME OR MINE,HIT ME WITH ANY OFFERS OR TRADES???,PLEASE SEND PICS AND INFO OF TRADES??? THIER WAS LOTS OF MONEY AND TIME SPENT HERE, AND THIS TRUCK HAS LOTS OF POTENTIAL,ANY QUESTIONS FEEL FREE TO CALL ME ,THANKS BILL 931-952-1502
I see you have a lot of interested parties with trucks for sale. I also have one that is a builder. It is a 72 AC cab on a 72 clean and painted front disc roller chassis. I have 67 & 68 front fenders with 3 different doors and all the extras. NO bed at all and no engine or trans. This is just if you want to build your own truck. I'm building my own now and these are all the extra parts I have bought to get all I wanted. If interested I'm in northern California and can be reached on my cell at (925) 337-9958 ask for Maurie Hoover