|
Num Posts
Sort Order
|
|
Posted: 07/29/08
03:34 PM
|
|
Im looking to convert a 4wheel drum non power assist brake system to a power assist front disc brake system on a 69 chevy 3/4 ton truck. Any ideas?
|
|
Posted: 07/29/08
06:54 PM
|
|
Get a 1/2 ton doner 73 -87. Change the hole crossmember they bolt right in except for a couple holes you can drill them out. you can use the power steering, master cylinder with boster, and the rear end.CPP,Brothers, or Early Classic Enterprisses has the spring perches the put the rear in.Get 1/2 ton springs for the rear. Make sure you use the front sway bar,you will wish you had if you don't.
|
cgeorge
New User
| Posts: 2
| Joined: 08/08
Posted: 08/17/08
07:20 AM
|
|
i have a 1965 chevy 1 ton panel truck with drum brakes i am looking to convert to power disc and keep the 8 lug pattern any help would be appreciated
|
|
|
mpayne
Administrator
| Posts: 297
| Joined: 11/07
Posted: 08/20/08
09:02 AM
|
|
Disc brakes must be very popular topic on the forums, I would think Brothers Trucks or LMC Trucks would have a kit available.
|
6D9GMC
New User
| Posts: 7
| Joined: 10/08
Posted: 10/20/08
03:32 PM
|
|
i agree with your decision i did the same to my 69 gmc and i tell you what it was worth it, and i would agree with curtisfox... find a doner best choice
|