What block hugger headers can be used when using a LS in stock frame?
i don't know about the LS motors.. but there are some sanderson headers that the left header will clear the stock location steering box. the #8 tube goes up and forward and the downpipe aims forward.. also .. those are for gen 1 and 2 motors.. you have a gen 3 or gen 4 LS motor.give them a call see if they have any of the CC4 versions for the LS motorsSanderson CC4 Small Block Chevy Header SetSKU: CC4-Pthey make also a CC2 and a CC3 versions for small block gen1 and 2 motors but i don't see any yet for LS.. but they should be able to knock out some.. you will have to ask them.. if they supply their employees tee shirts to work in the tube bending shop.. that say.. GET BENT on them. you might also want to ask Edelbrock if they have any of their neat block huggers that will work with the LS motors as they have a long pipe that comes down along side the pan and turns backwards.. so you don't have to come up with a curved transition from the collector to the rest of your system.. just an offset. there are a LOT of header brands out there. there are also.. really reallly realllly neat.. little blue plastic curve sections that you assemble into the header shape. and tighten the fasteners. then send the assembled device to the company or decipher it by reading the numbers that align and they bend tubes to fit exactly on their CNC tube bender..
Thanks I will try that.